ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Switches/Encoders > Multi Control Devices
> SKQU Series > SKQUCAA010
Related information
｜Photo ｜Dimensions ｜Mounting Hole Dimensions ｜Circuit Diagram ｜

4-direction with Center-push Function (SMD & Snap-in Type) SKQU Series

Detail

With Center Push Type

Model No. SKQUCAA010

Type Snap-in
Operating force 4-direction 1.57N
Center push 3.14N
Travel 4-direction 0.4mm
Center push 0.2mm
Operating life
(5mA 5V DC) 		100,000 cycles for each direction
Initial contact resistance 500mΩ max.
Minimum packing unit (pcs.) 1,000

Operating temperature range -30℃ to +85℃
Ratings (max.)/(min.) (Resistive load) 50mA 12V DC/10µA 1V DC
Electrical performance Directional resolution 4-direction
Insulation resistance 100MΩ min. 100V DC
Voltage proof 250V AC for 1 minute
Mechanical performance Direction application force 1.57(+0.39, -0.69)N
Push application force 3.14±0.59N
Robustness of terminal 49N for 1 minute
Solder heat resistance Manual soldering 350℃ max. 3s max.
Dip soldering 260℃ max. 5s max.
Durability Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively
Operating life Directions 100,000 cycles
Center push 100,000 cycles
Environmental performance Cold -30±2℃ for 96h
Dry heat 80±2℃ for 96h
Damp heat 60±2℃, 90 to 95%RH for 96h

Photo

Multi Control Devices

Dimensions

Multi Control Devices

Mounting Hole Dimensions

Multi Control Devices

 
1. Viewed from mounting face.
2. Using a 1.6mm thick PC board is recommended.

Circuit Diagram

Multi Control Devices

Notes are common to this series/models.
  • For SKQUAA, and SKQUBA models, the 4-directional operating force and travel are measured 0.9mm below the top of the stem.
  • For SKQUCA models, the 4-drectional operating force and travel are measured 2.9mm below the top of the stem.
  • For SKQUDB models, the 4-drectional operating force and travel are measured 1.5mm below the top of the stem.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • For surface mount type, 1-reel is the minimum packing units. (Please see taping specifications)
  • Using a 1.6mm thick PC board is recommended. (Snap-in type.)
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.