ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Switches/Encoders > TACT Switch(TM)
> SKHJ Series > SKHJGSA010
Related information
｜Photo ｜Dimensions ｜Mounting Hole Dimensions ｜Circuit Diagram ｜Soldering Conditions ｜
｜Products Line of Knob ｜Examples of Custom Products ｜

8.0mm Square LED Built-in TACT Switch™ (Snap-in) SKHJ Series

Detail

With LED Type

Model No. SKHJGSA010

Type Snap-in
Operating force 1.57N
Operating direction Vertical
Travel 0.25mm
Operating life
(5mA 5V DC) 		500,000 cycles
Initial contact resistance 100mΩ max.
Frame color Gray
LED color Orange
(High brightness)
Minimum packing unit (pcs.) 1,000

Series type Sharp feeling type
Operating temperature range -20℃ to +70℃
Rating (max.) 50mA 12V DC
Rating (min.) 10µA 1V DC
Electrical performance Insulation resistance 100MΩ min. 100V DC
Voltage proof 250V AC for 1 minute
Durability Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively
Environmental performance Cold -30±2℃ for 96h
Dry heat 80±2℃ for 96h
Damp heat 60±2℃, 90 to 95%RH for 96h
Specifications of LED Color of illumination Orange (High brightness)
Power dissipation P (mW) 40
Forward pulse peak current IFP (mA) 80
Forward current IFDC (mA) 15
Reverse voltage VR (V) 3
Forward voltage VF (V) IF=10mA 2.7 max. 2.0 TYP
Reverse current IR (µA) VR=4V 10 max.
Peak emission wave length λ peak (nm) IF=10mA 630 TYP
Spectral line half width Δ λ (nm) IF=10mA 40 TYP
Luminous intensity IV (mcd) IF=10mA 1.5 min. 4.0 TYP

Photo

TACT Switch(TM)

Dimensions

TACT Switch(TM)

Mounting Hole Dimensions

TACT Switch(TM)

 
Viewed from mounting face.

Circuit Diagram

TACT Switch(TM)


Soldering Conditions

Conditions for Auto-dip
Manual Soldering
1. Consult with us for TACT switchTM washing conditions.
2. Prevent flux penetration from the top side of the TACT switchTM.
3. Switch terminals and a PC board should not be coated with flux prior to soldering.
4. The second soldering should be done after the switch returns to normal temperature.
5. Use the flux with a specific gravity of at least 0.81.
(MH-820V or CF220V by TAMURA Corporation, or their equivalents.)

Products Line of Knob

Dimensions (Unit: mm)
Cap Color Clear
Model SK2AA00520
keytop Color Red
Blue
Ivory
Black
Yellow
Model SK2AA00210
SK2AA00220
SK2AA00230
SK2AA00240
SK2AA00250
Keytop + Cap Color Red
Blue
Ivory
Black
Yellow
Model SK2AA00260
SK2AA00270
SK2AA00280
SK2AA00290
SK2AA00300
Label dimensions (Unit: mm)
 
1. The knob will be delivered together with the switch but packed separately.
2. The label is not included.

Examples of Custom Products

Examples of Custom Products

Examples of Multi Control by Combination of Standard Products


Operation Image   Component of Products    

Features

The control knob with a push action and the center light has been achieved with the combination of a small hollow pulse switch and a TACT switchTM.
Applications
Car audio, home telephone, mini-components, etc.

Notes are common to this series/models.
  • Please use 1.6mm thick PC boards.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.