ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Switches/Encoders > TACT Switch(TM)
> SKHH Series > SKHHLMA010
Related information
｜Photo ｜Dimensions ｜Mounting Hole Dimensions ｜Circuit Diagram ｜Soldering Conditions ｜

6.0mm Square TACT Switch™ (Snap-in) SKHH Series

Detail

Horizontal Type

Model No. SKHHLMA010

Type Snap-in
Operating force 0.98N
Operating direction Horizontal
Travel 0.25mm
Operating life
(5mA 5V DC) 		1,000,000 cycles
Initial contact resistance 100mΩ max.
Stem color Black
Stem length l=3.85mm
Minimum packing unit (pcs.) 1,000

Series type Sharp feeling type
Operating temperature range -30℃ to +85℃
Rating (max.) 50mA 12V DC
Rating (min.) 10µA 1V DC
Electrical performance Insulation resistance 100MΩ min. 100V DC
Voltage proof 250V AC for 1 minute
Durability Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively
Environmental performance Cold -30±2℃ for 96h
Dry heat 80±2℃ for 96h
Damp heat 60±2℃, 90 to 95%RH for 96h

Photo

TACT Switch(TM)

Dimensions

TACT Switch(TM)

Mounting Hole Dimensions

TACT Switch(TM)

 
Viewed from mounting face.

Circuit Diagram

TACT Switch(TM)


Soldering Conditions

Conditions for Auto-dip
Manual Soldering
1. Consult with us for TACT switchTM washing conditions.
2. Prevent flux penetration from the top side of the TACT switchTM.
3. Switch terminals and a PC board should not be coated with flux prior to soldering.
4. The second soldering should be done after the switch returns to normal temperature.
5. Use the flux with a specific gravity of at least 0.81.
(EC-19s-8 by TAMURA Corporation, or their equivalents.)

Notes are common to this series/models.
  • Please use 1.6mm thick PC boards.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • This products can be used in vehicles.
    Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.