ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Switches/Encoders > TACT Switch(TM)
> SKEG Series > SKEGACA010
Related information
｜Photo ｜Dimensions ｜Mounting Hole Dimensions ｜Circuit Diagram ｜Soldering Conditions ｜
｜Products Line of Knob ｜

6.0mm Square TACT Switch™ (Snap-in) SKEG Series

Detail

Vertical Type

Model No. SKEGACA010

Type Snap-in
Operating force 0.78N
Operating direction Vertical
Travel 1mm
Operating life
(5mA 5V DC) 		100,000 cycles
Initial contact resistance 1kΩ max.
Stem color Ivory
Variety Joint stem
Minimum packing unit (pcs.) 1,000

Series type Soft feeling type
Operating temperature range -20℃ to +70℃
Rating (max.) 5mA 12V DC
Rating (min.) 10µA 1V DC
Electrical performance Insulation resistance 100MΩ min. 100V DC
Voltage proof 250V AC for 1 minute
Durability Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively
Environmental performance Cold -30±2℃ for 96h
Dry heat 80±2℃ for 96h
Damp heat 60±2℃, 90 to 95%RH for 96h

Photo

TACT Switch(TM)

Dimensions

TACT Switch(TM)

Mounting Hole Dimensions

TACT Switch(TM)

 
Viewed from mounting face.

Circuit Diagram

TACT Switch(TM)


Soldering Conditions

Conditions for Auto-dip
Manual Soldering
1. Consult with us for TACT switchTM washing conditions.
2. Prevent flux penetration from the top side of the TACT switchTM.
3. Switch terminals and a PC board should not be coated with flux prior to soldering.
4. The second soldering should be done after the switch returns to normal temperature.
5. Use the flux with a specific gravity of at least 0.81.
(MH-820V or CF220V by TAMURA Corporation, or their equivalents.)

Products Line of Knob

Dimensions (Unit: mm)
Cap Color Clear
Model SK2AA00540
keytop Color Red
Blue
Ivory
Black
Yellow
Model SK2AA00310
SK2AA00320
SK2AA00330
SK2AA00340
SK2AA00350
Keytop + Cap Color Red
Blue
Ivory
Black
Yellow
Model SK2AA00360
SK2AA00370
SK2AA00380
SK2AA00390
SK2AA00400
Label dimensions (Unit: mm)
 
1. The knob will be delivered together with the switch but packed separately.
2. The label is not included.

Notes are common to this series/models.
  • Please use 1.6mm thick PC boards. (For horizontal type, 1.0mm)
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • This products can be used in vehicles.
    Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.