|
|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
|
|
||
|
Related information
|
| |Dimensions |Mounting Hole Dimensions |Circuit Diagram | |
|
Detail| Model No. | SSST010600 |
| Travel | 4mm |
| Operating section directions | Vertical |
| Length of operating section | 2mm |
| Poles | 1 |
| Positions | 2 |
| Operating force | 2±1N |
| Mounting method | Snap-in (t1) |
| Changeover timing | Non shorting |
| Soldering | Manual, Dip |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -10℃ to +60℃ | ||
| Rating (max.)/(min.) (Resistive load) | 0.1A 12V DC/50µA 3V DC | ||
| Electrical performance | Contact resistance (Initial performance/After lifetime) | 70mΩ max./130mΩ max. | |
| Insulation resistance | 100MΩ min. 500V DC | ||
| Voltage proof | 500V AC for 1 minute | ||
| Mechanical performance | Robustness of terminal | 3N for 1 minute | |
| Robustness of actuator | Operating direction | 20N | |
| Pulling direction | 10N | ||
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively | ||
| Resistance to soldering heat | Manual soldering | 350±10℃,3s max. | |
| Dip soldering | 260±5℃, 5(0, -1)s | ||
| Durability | Operating life without load |
10,000 cycles 100mΩ max. |
|
|
Operating life with load (Load: as ratings) |
10,000 cycles 130mΩ max. |
||
| Environmental performance | Cold | -20±2℃ for 96h | |
| Dry heat | 85±2℃ for 96h | ||
| Damp heat | 40±2℃, 90 to 95%RH for 96h | ||
Dimensions
Mounting Hole Dimensions
|
Circuit Diagram
|
Notes are common to this series/models. |
|
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |