|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
| ｜Dimensions ｜Mounting Hole Dimensions ｜Circuit Diagram ｜ |
|
1.5mm-travel, with External Knob Type Slide Switch SSAC Series
Detail
| Model No. | SSAC120200 |
| Travel | 1.5mm |
| Operating section directions | Horizontal |
| Length of operating section | 4.4mm |
| Poles | 2 |
| Positions | 3 |
| Operating force |
a, c → b 2±1.5N b → a, c 2.5±1.5N |
| Mounting method | Press-in |
| Changeover timing | Not specified |
| Soldering | Manual, Dip |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -10℃ to +60℃ | ||
| Rating (max.)/(min.) (Resistive load) | 1mA 5V DC/50µA 3V DC | ||
| Electrical performance | Contact resistance (Initial performance/After lifetime) | 100mΩ max./200mΩ max. | |
| Insulation resistance | 100MΩ min. 100V DC | ||
| Voltage proof | 100V AC for 1 minute | ||
| Mechanical performance | Robustness of terminal | 5N for 1 minute | |
| Robustness of actuator | Operating direction | 5N | |
| Pulling direction | 5N | ||
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively | ||
| Resistance to soldering heat | Manual soldering | 300±10℃,2s max. | |
| Dip soldering | 260±10℃, 5±1s | ||
| Durability | Operating life without load |
10,000 cycles 200mΩ max. |
|
|
Operating life with load (Load: as ratings) |
10,000 cycles 200mΩ max. |
||
| Environmental performance | Cold | -20±2℃ for 96h | |
| Dry heat | 85±2℃ for 96h | ||
| Damp heat | 40±2℃, 90 to 95%RH for 96h | ||
Dimensions
Mounting Hole Dimensions
|
Circuit Diagram
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |