ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Switches/Encoders > Rotary Switches
> SRRN Series > SRRN151800
Related information
｜Dimensions ｜Terminal Configuration ｜Circuit Diagram ｜Shaft Style ｜Attached Parts ｜

6-positions Vertical Type Rotary Switch SRRN Series

Detail

Model No. SRRN151800

Number of wafer 1
Poles 2
Positions 5
Changeover angle 30±3°
Changeover timing Non shorting
Rotational torque 70±30mN·m
Actuator configuration Round
Actuator length L: 20mm
Minimum packing unit (pcs.) 100

Operating temperature range -10℃ to +60℃
Rating (max.)/(min.) (Resistive load) 0.15A 12V DC/50µA 3V DC
Electrical performance Contact resistance (Initial performance/After lifetime) 50mΩ max./100mΩ max.
Insulation resistance 100MΩ min. 500V DC
Voltage proof 500V AC for 1 minute
Mechanical performance Terminal strength 5N for 1 minute
Actuator strength Rotational direction 1N·m
Push direction 100N
Wobble of actuator (load at the tip of shaft: 5N) Measuring position from mounting surface 15mm
Shaft wobble (max. value) 0.25mm max.
Applicable mounting dimension 20mm
Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively
Resistance to soldering heat Manual soldering 350±10℃, 3(+1, 0)s
Dip soldering 260±5℃, 10±1s
Durability Operating life without load 10,000 cycles 70mΩ max.
Operating life with load (Load: as ratings) 10,000 cycles 100mΩ max.
Environmental performance Cold -20±2℃ for 96h
Dry heat 85±2℃ for 96h
Damp heat 40±2℃, 90 to 95%RH for 96h

Dimensions

Rotary Switches

Terminal Configuration

Rotary Switches

Circuit Diagram

Rotary Switches

 
1. Standard poles per step.
2. The following mark in the above table indicate a stopper with the shaft turned fully counterclockwise when viewed from direction A of the diagrams.

Shaft Style

* Round Shaft

Attached Parts

Hexagonal nut (Unit: mm)
Flat washer (Unit: mm)
 
The following parts are included with the product.

Notes are common to this series/models.
  • All the axis are cutting shafts.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • Products other than those listed in the above chart are also available. Please contact us for details.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.