|
|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
|
|
||
|
Related information
|
| |Dimensions |Mounting Hole Dimensions |Terminal Configuration |Circuit Diagram | |
|
Detail| Model No. | SPPH130500 |
| Changeover timing | Non shorting |
| Travel | 1.5mm |
| Total travel | 2.5mm |
| Mounting method | PC board |
| Poles | 2 |
| Operating force | 3(+1, -0.7)N |
| Operation | Latching |
| Terminal style | Snap-in |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -40℃ to +85℃ | ||
| Ratings (max.)/(min.) (Resistive load) | 0.1A 30V DC/50µA 3V DC | ||
| Electrical performance | Contact resistance (Initial performance/After lifetime) | 20mΩ max./40mΩ max. | |
| Insulation resistance | 100MΩ min. 500V DC | ||
| Voltage proof | 500V AC for 1 minute | ||
| Mechanical performance | Terminal strength | 5N for 1 minute | |
| Actuator strength | Operating direction | 50N | |
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively | ||
| Resistance to soldering heat | Manual soldering | 350±10℃, 3(+1, 0)s | |
| Dip soldering | 260±5℃, 10±1s | ||
| Durability | Operating life without load |
10,000 cycles 40mΩ max. |
|
| Operating life with load (Load: as ratings) |
10,000 cycles 40mΩ max. |
||
| Environmental performance | Cold | -20±2℃ for 96h | |
| Dry heat | 85±2℃ for 96h | ||
| Damp heat | 40±2℃, 90 to 95%RH for 96h | ||
Dimensions
|
Mounting Hole Dimensions
|
Terminal Configuration
Circuit Diagram
|
Notes are common to this series/models. |
|
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |