|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
| ｜Dimensions ｜Mounting Hole Dimensions ｜Circuit Diagram ｜ |
|
4.5mm-travel Push Switch (Push-push Type) SPED2 Series
Detail
| Model No. | SPED220200 |
| Changeover timing | Non shorting |
| Total travel | 4.5mm |
| Mounting method | PC board |
| Poles | 2 |
| Circuit arrangement | 2-poles, 1-position |
| Operating force | 4.17±0.74N |
| Operation | Alternate |
| Terminal style | For PC board |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -40℃ to +85℃ | ||
| Ratings (max.) (Resistive load) | 1A 14.5V DC | ||
| Electrical performance | Contact resistance (Initial performance/After lifetime) | 100mΩ max. (Initial performance) | |
| Insulation resistance | 3MΩ min. 500V DC | ||
| Voltage proof | 100V AC for 1 minute | ||
| Mechanical performance | Actuator strength | Operating direction | 50N |
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively | ||
| Resistance to soldering heat | Manual soldering | 350±10℃, 3±0.5s | |
| Dip soldering | 260±5℃, 10±1s | ||
| Durability | Operating life without load |
30,000 cycles 100mΩ max. |
|
| Operating life with load (Load: as ratings) |
30,000 cycles 100mΩ max. |
||
| Environmental performance | Cold | -40±2℃ for 96h | |
| Dry heat | 85±2℃ for 96h | ||
| Damp heat | 40±2℃, 90 to 95%RH for 96h | ||
Dimensions
Mounting Hole Dimensions
|
Circuit Diagram
|
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |