ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Switches/Encoders > Push Switches
> SPEC Series > SPEC121300
Related information
｜Dimensions ｜Mounting Hole Dimensions ｜Actuator Configuration at Front Edge ｜
｜Terminal Configuration ｜Circuit Diagram ｜Attached Parts ｜

2.5mm-travel Vertical Type Push Switch SPEC Series

Detail

Model No. SPEC121300

Changeover timing Non shorting
Travel 2.5mm
Total travel 3.4mm
Mounting method PC board
Poles 2
Operating force 2±1N
Operation Latching
Terminal style Snap-in
Minimum packing unit (pcs.) 100

Operating temperature range -40℃ to +85℃
Ratings (max.)/(min.) (Resistive load) 0.1A 30V DC/50µA 3V DC
Electrical performance Contact resistance (Initial performance/After lifetime) 30mΩ max./50mΩ max.
Insulation resistance 100MΩ min. 500V DC
Voltage proof 500V AC for 1 minute
Mechanical performance Terminal strength 3N for 1 minute
Actuator strength Operating direction 50N
Pulling direction 50N
Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively
Resistance to soldering heat Manual soldering 350±10℃, 3(+1, 0)s
Dip soldering 260℃, max. 5s max.
Durability Operating life without load 10,000 cycles
50mΩ max.
Operating life with load (Load: as ratings) 10,000 cycles
50mΩ max.
Environmental performance Cold -20±2℃ for 96h
Dry heat 85±2℃ for 96h
Damp heat 40±2℃, 90 to 95%RH for 96h

Dimensions

Push Switches

 
Only the configurations with the straight terminal are indicated in the dimensions.

Mounting Hole Dimensions

Push Switches

 
Viewed from direction A in the dimensions.

Actuator Configuration at Front Edge

Push Switches

Terminal Configuration

Push Switches

Circuit Diagram

Push Switches


Attached Parts

Attached Parts

Push Switches

 
We recommend the use of adhesive to secure the knob when mounting onto switches.

Notes are common to this series/models.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • Products other than those listed in the above chart are also available. Please contact us for details.
  • This products can be used in vehicles.
    Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.