|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
| ｜Dimensions ｜Mounting Hole Dimensions ｜Circuit Diagram ｜ |
|
Explosion-prevention Standards Qualified Power Switch SDKS Series
Detail
| Model No. | SDKSA20100 |
| Type | Push |
| Circuit arrangement | SPDT |
| Total travel | 14.6mm |
| Operating force | 2.5±1.5N |
| Mounting method | Snap-in |
| Minimum packing unit (pcs.) | 100 |
| C-UL-US | 2A 250V AC, 4A 125V AC | ||
| SEMKO | 2A 250V~µ | ||
| Ratings satisfying local electrical appliance and material safety law | 125V 4A‡ | ||
| Operating temperature range | -30℃ to +60℃ | ||
| Ratings | 2A 250V AC, 4A 125V AC | ||
| Electrical performance | Contact resistance | 50mΩ max. | |
| Insulation resistance | 100MΩ min. 500V DC | ||
| Voltage proof | 1,500V AC for 1 minute | ||
| Mechanical performance | Robustness terminal | 70N for 1 minute | |
| Robustness of actuator | Operating direction | 20N | |
| Perpendicular direction | 30N | ||
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively | ||
| Durability Operating life |
6,000 cycles Load: as ratings. |
||
| Environmental performance | Cold | -40±2℃ for 96h | |
| Dry heat | 85±2℃ for 96h | ||
| Damp heat | 40±2℃, 90 to 95%RH for 96h | ||
Dimensions
Mounting Hole Dimensions
Circuit Diagram
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |