|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
| ｜Dimensions ｜Mounting Hole Dimensions ｜Terminal Style ｜Circuit Diagram ｜ |
|
5A 250V AC Qualified Primary Input Voltage Selection Type Power Switch SDKH Series
Detail
| Model No. | SDKHA80200 |
| Type | Slide |
| Circuit arrangement | 3P3T |
| Travel | 7mm |
| Operating force | 30N max. |
| Mounting method | Snap-in |
| Terminal style | For PC board |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -10℃ to +60℃ | ||
| Ratings | 5A 250V AC | ||
| Electrical performance | Contact resistance | 100mΩ max. | |
| Insulation resistance | 100MΩ min. 500V DC | ||
| Voltage proof | 2,000V AC for 1 minute | ||
| Mechanical performance | Robustness terminal | 10N for 1 minute | |
| Robustness of actuator | Operating direction | 50N | |
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively | ||
| Resistance to soldering heat | Manual soldering | 350±10℃, 3±0.5s | |
| Dip soldering | 260±5℃, 10±1s | ||
| Durability Operating life |
100 cycles Without load |
||
| Environmental performance | Cold | -20±2℃ for 96h | |
| Dry heat | 85±2℃ for 96h | ||
| Damp heat | 40±2℃, 90 to 95%RH for 96h | ||
Dimensions
Mounting Hole Dimensions
Terminal Style
Circuit Diagram
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |