ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Switches/Encoders > Multi Control Devices
> SSAF Series > SSAF120100
Related information
｜Dimensions ｜Land Dimensions ｜Operating Direction ｜Output Code ｜Soldering Condition ｜
｜Taping Specifications ｜

Slide Operation Type Stick Switch with 8-contact and Center-push Function SSAF Series

Detail

Model No. SSAF120100

Slide operating force 0.5(+0.5, -0.25)N
Slide ON travel 0.65±0.25mm
Push operating force 2.5(+0.7, -0.5)N
Push ON travel 0.2±0.1mm
Location lug Without
Minimum packing unit (pcs.) 1,200

Operating temperature range -10℃ to +60℃
Ratings (max.) (Resistive load) 20mA 5V DC
Electrical performance Output voltage 1V max. at 1mA 5V DC (Resistive load)
Directional resolution 8-direction
Insulation resistance 10MΩ min. 100V DC
Voltage proof 100V AC for 1 minute
Mechanical performance Direction application force 0.5(+0.5, -0.35)N
Push application force 2.5(+0.7, -0.5)N
Robustness of actuator Pushing direction 50N
Operation direction 50N
Solder heat resistance Manual soldering 350±10℃ 4(+1, 0)s
Reflow soldering Refer to soldering conditions
Durability Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively
Operating life Directions 500,000 cycles
Center push 500,000 cycles
Environmental performance Cold -40±2℃ for 96h
Dry heat 85±2℃ for 96h
Damp heat 40±2℃, 90 to 95%RH for 96h

Dimensions

Multi Control Devices

Land Dimensions

Multi Control Devices

 
Viewed from mounting face.

Operating Direction

Multi Control Devices

Output Code

Multi Control Devices


Soldering Condition

Example of Reflow Soldering Condition (Reference)
1. Heating method
Double heating method with infrared heater.
2. Temperature measurement
Thermocouple 0.1 to 0.2 Φ CA (K) or CC (T) at solder joints (copper foil surface). A heat resisting tape should be used to fix thermocouple.
3. Temperature profile
(1) The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where PC board's temperature greatly differs from that of the switch, depending on the PC board's material, size, thickness, etc. Care, should be taken to prevent the switch's surface temperature from exceeding 260°C.
(2) Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended.

Taping Specifications

Taping Packaging for Auto-insertion
Reel Size
Number of Packages
1 reel 		1,200
Number of Packages
1 case (shipment within Japan) 		2,400
Number of Packages
1 case (shipment outside of Japan) 		2,400
Reel Width W (mm) W = 24.4
Tape width (mm) 24
 
Please place purchase orders for taping products per minmium package units (1 reel or a case).

Notes are common to this series/models.
  • Please place purchase orders for taping products per minimum package units （1 reel or a case）. Please see taping specifications.
  • Ask us for the export packaging unit.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.