|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
| ｜Dimensions ｜Mounting Hole Dimensions ｜Output Chart ｜ |
|
4-directional Stick Switch (with Encoder/Center-push Function) RKJXT1F Series
Detail
| Model No. | RKJXT1F42001 |
| Type | Switch | ||
| Number of operating shafts | Single-shaft | ||
| Shaft material | Metal | ||
| Stick switches | Contact resistance | Lever & push operation | 1Ω max. |
|
Operating angle (Lever operation) |
9° max. | ||
|
Travel (Push operation) |
0.3±0.2mm | ||
| Maximum resolution | Encoder | 15-pulses/30-detents | |
| Minimum packing unit (pcs.) | 1,320 | ||
| Operating temperature range | -40℃ to +85℃ | ||
| Ratings (max.) (Resistive load) | 10mA 5V DC | ||
| Electrical performance | Directional resolution | 4-direction | |
| Insulation resistance | 100MΩ min. 250V DC | ||
| Voltage proof | 300V AC for 1 minute or 360V AC for 2s | ||
| Mechanical performance | Direction application force | 40±25mN·m | |
| Push application force | 5±2N | ||
| Encoders detent torque | 15±8mN·m | ||
| Robustness of terminal | 5N for 1 minute | ||
| Robustness of actuator | Pushing direction | 100N | |
| Operation direction | 0.4N·m | ||
| Solder heat resistance | Manual soldering | 350±5℃, 3s max. | |
| Dip soldering | 260±5℃, 5±1s | ||
| Durability | Vibration | 8.3±1 to 200±4 to 8.3±1Hz, 4.4G fixed (for 15 minutes/1 cycle), 3 angles each 2 hours | |
| Operating life | Directions | 500,000 cycles | |
| Center push | 500,000 cycles | ||
| Encoder | 15,000 cycles | ||
| Environmental performance | Cold | -40±2℃ for 500h | |
| Dry heat | 85±2℃ for 500h | ||
| Damp heat | 60±2℃, 90 to 95%RH for 500h | ||
Dimensions
Mounting Hole Dimensions
|
Output Chart
|
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |