|
|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
|
|
||
|
Related information
|
| |Dimensions |Mounting Hole Dimensions |Circuit Diagram | |
|
Detail| Model No. | RKJXL100401V |
| Type | Switch |
| Number of operating shafts | Single-shaft |
| Shaft material | Metal |
| Operating angle (Lever operation) | 12±3° |
| Travel (Push operation) | 0.2±0.1mm |
| Minimum packing unit (pcs.) | 800 |
| Operating temperature range | -30℃ to +70℃ | ||
| Ratings (max.) (Resistive load) | 10mA 5V DC | ||
| Electrical performance | Directional resolution | 8-direction | |
| Insulation resistance | 100MΩ min. 250V DC | ||
| Voltage proof | 300V AC for 1 minute or 360V AC for 2s | ||
| Mechanical performance | Direction application force | 10±7mN·m | |
| Push application force | 4.5±1N | ||
| Solder heat resistance | Manual soldering | 350±5℃, 3s max. | |
| Dip soldering | 260℃ max. 6s max. | ||
| Durability | Vibration | 8.3±1 to 200±4 to 8.3±1Hz, 4.4G fixed (for 15 minutes/1 cycle), 3 angles each 2 hours | |
| Operating life | Directions | 100,000 cycles | |
| Center push | 100,000 cycles | ||
| Environmental performance | Cold | -40±2℃ for 500h | |
| Dry heat | 85±2℃ for 500h | ||
| Damp heat | 60±2℃, 90 to 95%RH for 500h | ||
Dimensions
Mounting Hole Dimensions
Circuit Diagram
|
Notes are common to this series/models. |
|
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |