ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Switches/Encoders > Encoders
> SRGA Series > SRGAVC0301
Related information
｜Dimensions ｜Mounting Hole Dimensions ｜Shape of Frame Leg (a) ｜Standard Codes ｜

Hollow Shaft Encoder SRGA Series

Detail

Model No. SRGAVC0301

Torque 20±10mN·m
Operating direction Vertical
Output code Gray
Positions 12
Changeover angle 30°
Product type Standard (Hollow shaft)
Minimum packing unit (pcs.) 100

Operating temperature range -10℃ to +60℃
Rating (max.)/(min.) (Resistive load) 0.1A 12V DC/50μA 3V DC
Electrical performance Initial contact resistance
(Intial performance/After lifetime) 		1Ω max./1Ω max.
Insulation resistance 100MΩ min. 100V DC
Voltage proof 100V AC for 1 minute
Mechanical performance Robustness of terminal 5N for 1 minute
Actuator strength Pushing direction 100N
Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively
Resistance to soldering heat Manual soldering 350±10℃, 3(+1, 0)s
Dip soldering 260±5℃, 10±1s
Durability Operating life without load 10,000 cycles
Operating life with load
(Load: as ratings) 		10,000 cycles (0.1A 12V DC)
Environmental performance Cold -20±2℃ for 96h
Dry heat 85±2℃ for 96h
Damp heat 40±2℃, 90 to 95%RH for 96h

Dimensions

Encoders

Mounting Hole Dimensions

Encoders

 
1. Viewed from the direction A in the dimensions.
2. Dummy terminal: terminal No. (5).

Shape of Frame Leg (a)

Encoders

Standard Codes

Encoders

 
1. Viewed from the direction A. in the dimensions.
2. For terminal alignment, please refer to the illustration.
Please note that might be ON output of the dummy terminal in the circuit design.

Notes are common to this series/models.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • For reflow type, 1-reel is the minimum packing unit. Please see taping specifications.
  • Products other than those listed in the above chart are also available. Please contact us for details.
  • The operating temperature range for automotive applications can be raised upon request. Please contact us for requirements of this kind.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.