ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Switches/Encoders > Encoders
> EC12 Series > EC12D1564402
Related information
｜Photo ｜Dimensions ｜Mounting Hole Dimensions ｜Output Wave ｜Sliding Noise ｜Shaft Variety ｜

12mm Size Insulated Shaft Encoder EC12 Series

Detail

With Switch Type

Model No. EC12D1564402

Actuator length 17.5mm
Torque 10±5mN·m
Number of detent 30
Number of pulse 15
Operating direction Vertical
Operating force of push-on switch 3N
Travel of push-on switch 0.5mm
Minimum packing unit (pcs.) 1,280

Operating temperature range -40℃ to +85℃
Maximum operating current (Resistive load) 10mA
Electrical performance Ratings 1mA 5V DC
Output signal Output of A and B signals, proportionate to phase difference
Insulation resistance 100MΩ min. 250V DC
Voltage proof 300V AC for 1 minute or 360V AC for 1s
Mechanical performance Push-pull strength 100N
Resistance to soldering heat Manual soldering 350℃ max. 3s max.
Dip soldering 260±5℃, 3±1s
Durability Rotational life 30,000 cycles
Environmental performance Cold -40±3℃ for 240h±10h
Dry heat 85±3℃ for 240h±10h
Damp heat 60±2℃, 90 to 95%RH for 240h±10h
Push-on switch specifications Circuit / number of contact Single pole and single throw (Push-on)
Travel 0.5±0.3mm
Operating force 3(+1.5, -1.0)N
Ratational torque 1mA 5V DC
Contact resistance 100mΩ max.
Operating life 30,000 times min.

Photo

Encoders

Dimensions

Encoders

Mounting Hole Dimensions

Encoders

 
Viewed from mounting face.

Output Wave

Encoders

Sliding Noise

Encoders

 
At R=5kΩ Chattering: 3ms max. Bounce: 2ms max.

Shaft Variety

Shaft Style

Flat Type
  Unit : mm
With high collar type

Notes are common to this series/models.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • Products other than those listed in the above chart are also available. Please contact us for details.
  • Nuts and washers are not included. If required, please contact us.
  • This products can be used in vehicles.
    Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.