ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Switches/Encoders > Encoders
> EC11 Series > EC11E1534408
Related information
｜Photo ｜Dimensions ｜Mounting Hole Dimensions ｜Sliding Noise ｜Shaft Variety ｜

11mm Size Metal Shaft Encoder EC11 Series

Detail

Model No. EC11E1534408

Structure Vertical
Actuator configuration Flat
Actuator length 20mm
Torque 7(+3,-4)mN·m
Number of detent Without
Number of pulse 15
Operating direction Vertical
Push-on switch With
Travel of push-on switch 1.5mm
Operating life 15,000 cycles
Minimum packing unit (pcs.) 1,200

Operating temperature range -30℃ to +85℃
Maximum operating current (Resistive load) 10mA
Electrical performance Ratings 10mA 5V DC
Output signal Output of A and B signals, proportionate to phase difference
Insulation resistance 100MΩ min. 250V DC
Voltage proof 300V AC for 1 minute
Mechanical performance Push-pull strength 100N
Resistance to soldering heat Manual soldering 350℃ max. 3s max.
Dip soldering 260±5℃, 5±1s
Durability Rotational life 15,000 cycles
Environmental performance Cold -40±3℃ for 240h
Dry heat 85±3℃ for 240h
Damp heat 60±2℃, 90 to 95%RH for 240h
Push-on switch specifications Circuit / number of contact Single pole and single throw (Push-on)
Travel 1.5±0.5mm
Operating force 4±2N
Ratational torque 0.5A 16V DC (1mA 16V DC min. ratings)
Contact resistance 100mΩ for initial period;
200mΩ after rotational life
Operating life 20,000 times min.

Photo

Encoders

Dimensions

Encoders

Mounting Hole Dimensions

Encoders

 
Viewed from mounting side.

Sliding Noise

Encoders

 
At R=5kΩ Chattering: 3ms max. Bounce: 2ms max.

Shaft Variety

Shaft Style

Single-shaft Type
1) Knourled Type Unit : mm
Style (SHaft diameter : φ6)
2) Flat Type
 Unit : mm
Style (SHaft diameter : φ6)
3) Slotted Type
 Unit : mm
Style (SHaft diameter : φ6)

Notes are common to this series/models.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • Products other than those listed in the above chart are also available. Please contact us for details.
  • This products can be used in vehicles.
    Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.