|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
| ｜Photo ｜Dimensions ｜Terminal Style ｜Circuit Diagram ｜ |
|
Two-way Detection Type Detector Switch SSCF Series
Detail
| Model No. | SSCF210100 |
| Operating direction | Vertical |
| Poles | 1 |
| Positions | 2 |
| Changeover timing | Non shorting |
| Terminal style | For PC board |
| Operating force | 0.7N max. |
| Mounting method | Screw |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -40℃ to +85℃ | |
| Rating (max.)/(min.) (Resistive load) | 0.1A 12V DC/50μA 3V DC | |
| Electrical performance |
Contact resistance (Initial performance/After lifetime) |
100mΩ max./300mΩ max. |
| Insulation resistance | 100MΩ min. 100V DC | |
| Voltage proof | 100V AC for 1 minute | |
| Mechanical performance | Terminal strength | 5N for 1 minute |
| Actuator strength | 10N | |
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively | |
| Resistance to soldering heat | Manual soldering | 350±10℃, 3(+1, 0)s |
| Dip soldering | 260±5℃, 5±1s | |
| Durability | Operation life without load | 50,000 cycles 200mΩ max. |
| Operating life with load (Load: as ratings) | 50,000 cycles 300mΩ max. | |
| Environmental performance | Cold | -20±2℃ for 96h |
| Dry heat | 85±2℃ for 96h | |
| Damp heat | 40±2℃, 90 to 95%RH for 96h | |
Photo
Dimensions
Terminal Style
Circuit Diagram
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |