|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
| ｜Dimensions ｜Mounting Hole Dimensions ｜Circuit Diagram ｜ |
|
Motor-driven Master Slide Potentiometer (Motor N Fader, Motor K Fader)
Detail
| Model No. | RSA0N11M9A07 |
| Number of resistor elements | Single-unit |
| Direction of lever | Vertical |
| Travel | 100mm |
| Type | Motor N fader |
| Lever types |
9-T (T-Bar) |
| Length of lever | 8.2mm |
| Total resistance | 10kΩ |
| Resistance taper | 1B |
| Terminal style | For PC board |
| Touch sense track | With |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -10°C to +60°C | ||
| Mechanical Performance | Operating force | 0.3 to 1.3N | |
| Stopper strength | 100N | ||
| Lever push-pull strength | 50N | ||
| Lever wobble (Both side) | 2(2×L)/25mm | ||
| Lever deviation (One side) | 0.5mm max. | ||
| Solder heat resistance | Manual soldering | 350°C max. 3s max. | |
| Dip soldering | 260°C max. 5s max. | ||
| Electrical Performance | Total resistance tolerance | ±20% | |
| Maximum operating voltage | 10V DC, 500V AC | ||
| Rated voltage of motor | 10V DC | ||
| Maximum current of motor | 800mA or less (at 10V DC) | ||
| Durability | Sliding life | 30,000 cycles | |
| Environmental Test | Cold | -30±2°C for 96h | |
| Long-term heat resistance | 70±2°C for 240h | ||
| Moisture resistance | 40±2°C, 90 to 95%RH for 96h | ||
Dimensions
Mounting Hole Dimensions
|
Circuit Diagram
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |