|
|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
|
|
||
|
Related information
|
| |Dimensions |Mounting Hole Dimensions |Terminal layout / Circuit diagram | |
|
Detail| Model No. | RS15H121A009 |
| Number of resistor elements | Dual-unit |
| Direction of lever | Vertical |
| Travel | 15mm |
| Lever types | A |
| Length of lever | 4.5mm |
| Total resistance | 10kΩ |
| Resistance taper | 15A |
| Center detent | Without |
| Tap | Not available |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -25°C to +70°C | ||
| Mechanical performance | Operating force | 0.2 to 1.1N | |
| Stopper strength | 30N | ||
| Lever push-pull strength | 30N | ||
| Lever wobble (Both side) | 1.6mm max. | ||
| Lever deviation (One side) | 0.5mm max. | ||
| Solder heat resistance | Manual soldering | 350°C max. 3s max. | |
| Dip soldering | 260°C max. 5s max. | ||
| Electrical performance | Total resistance tolerance | ±20% | |
| Maximum operating voltage | 50V AC, 10V DC | ||
| Durability | Sliding life | 10,000 cycles | |
| Environmental test | Cold | -30±2°C for 96h | |
| Long-term heat resistance | 70±2°C for 96h | ||
| Moisture resistance | 40±2°C, 90 to 95%RH for 96h | ||
Dimensions
Mounting Hole Dimensions
|
Terminal layout / Circuit diagram
|
Notes are common to this series/models. |
|
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |