|
|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
|
|
||
|
Related information
|
| |Photo |Dimensions |Mounting Hole Dimensions | |
|
Detail| Model No. | RKJXK122400Y |
| Type | Variable resistor | |
| Number of operating shafts | Single-shaft | |
| Shaft material | Metal | |
| Lever return mechanism | With | |
| Potentiometer Part | Maximum operating voltage | 50V AC, 5V DC |
| Total resistance | 10kΩ | |
| Resistance taper | B (0B) | |
| Center push part | Center push | With |
| Ratings (max.) | 50mA 12V DC | |
|
Travel (mm) |
0.5(+0.5, -0.4) | |
| Minimum packing unit (pcs.) | 500 | |
| Operating temperature range | -10℃ to +70℃ | ||
| Electrical performance | Directional resolution | Continuous | |
| Insulation resistance | 100MΩ min. 250V DC | ||
| Voltage proof | 250V AC for 1 minute | ||
| Rated power | 0.0125W | ||
| Mechanical performance | Direction application force | 6±4mN·m | |
| Push application force | 5.2±2.6N | ||
| Environmental performance | Cold | -30±2℃ for 96h | |
| Dry heat | 80±2℃ for 96h | ||
| Damp heat | 60±2℃, 90 to 95%RH for 96h | ||
| Mechanical performance | Solder heat resistance | Manual soldering | 300℃ max. 3s max. |
| Dip soldering | 260±5℃, 5±1s | ||
| Slider noise | 300mV max. by JIS method | ||
| Lever stopper strength | 0.3N·m | ||
| Lever play | 5° max. | ||
| Lever strength | 50N min. (Push/Pull) | ||
| Durability | Operating life | Directions | 100,000 cycles |
| Center push | 100,000 cycles | ||
Photo
Dimensions
Mounting Hole Dimensions
|
|
Notes are common to this series/models. |
|
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |