ALPS Manufacturer of Electronic Components/Parts Catalog

27mm Size Metal Shaft Potentiometer RK27 Series

Detail

Model No. RK271111001T

Number of resistor elements Single-unit
Mounting direction Horizontal type
Shaft types Slotted
Length of the shaft 25mm
Detent Without
Total resistance 100kΩ
Resistance taper 15A
Minimum packing unit (pcs.) 100

Operating temperature range -10℃ to +70℃
Electrical Performance Total resistance tolerance ±20%
Rated power 0.05W
Maximum operating voltage 30V AC
Residual resistance Nominal total resistance of 0.1% or less
Insulation resistance 100MΩ min. 500V DC
Voltage proof 500V AC for 1 minute
Mechanical Performance Total rotational angle 300±3°
Rotational torque 8 to 35mN·m
Stopper strength 0.9N·m
Push-pull strength 100N max.
Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively
Solder heat resistance Manual soldering 350℃ max, 5s max.
Durability Operating life 15,000 cycles
Environmental test Cold -30±3℃ for 96h
Dry heat 70±2℃ for 96h
Damp heat 40±2℃, 90 to 95%RH for 96h

Photo

Metal Shaft Potentiometers

Dimensions

Metal Shaft Potentiometers

Mounting Hole Dimensions

Metal Shaft Potentiometers

 
Viewed from mounting side.

Attached Parts

Hexagonal nut (Unit: mm)
Flat washer (Unit: mm)
Bearing screw diameter M8
 
These parts are attached to the following products.
Notes are common to this series/models.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • Additional product specifications in response to those not included in the above recommended products are also available.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.