|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
| ｜Photo ｜Dimensions ｜Mounting Hole Dimensions ｜ |
|
20mm Size Metal Shaft Potentiometer (for Electric Ovens) RK20B Series
Detail
| Model No. | RK20B1100001 |
| Number of resistor elements | Single-unit |
| Mounting direction | Vertical type |
| Shaft types | Flat |
| Length of the shaft | 19.95mm |
| Total resistance | 10kΩ |
| Resistance taper | 1B |
| Switch contact resistance | 300Ω max. |
| Switch rating | 10mA 12V DC |
| Axial locking release | 7±3N |
| Rotation stoppage strength when the axis is locked | 1.7N·m min. |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -10℃ to +105℃ | ||
| Electrical Performance | Total resistance tolerance | ±20% | |
| Rated power | 0.06W | ||
| Maximum operating voltage | 20V DC | ||
| Insulation resistance | 100MΩ min. 250V DC | ||
| Voltage proof | 300V AC for 1 minute | ||
| Mechanical Performance | Total rotational angle | 360°(Endless) | |
| Rotational torque | 20 to 80mN·m | ||
| Detent torque | 140±50mN·m | ||
| Push-pull strength | 100N max. | ||
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively | ||
| Solder heat resistance | Manual soldering | 350℃ max. 3s max. | |
| Dip soldering | 260±5℃, 5s max. | ||
| Durability | Operating life | 15,000 cycles | |
| Environmental test | Cold | -30±3℃ for 96h | |
| Dry heat | 105±2℃ for 240h | ||
| Damp heat | 60±2℃, 90 to 95%RH for 240h | ||
Photo
Dimensions
Mounting Hole Dimensions
|
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |