|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
| ｜Photo ｜Dimensions ｜Mounting Hole Dimensions ｜Attached Parts ｜ |
|
16mm Size Metal Shaft Potentiometer RK163 Series
Detail
| Model No. | RK1631210AX9 |
| Number of resistor elements | Dual-unit |
| Mounting direction | Horizontal type |
| Shaft types | Knurled |
| Terminal style | For PC board |
| Length of the shaft | 15mm |
| Center detent | Without |
| Total resistance | 10kΩ |
| Resistance taper | 1B |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -10℃ to +70℃ | ||
| Electrical Performance | Total resistance tolerance | ±20% | |
| Rated power | 0.05W | ||
| Maximum operating voltage | 150V AC, 5V DC | ||
| Residual resistance | 20Ω max. | ||
| Insulation resistance | 100MΩ min. 500V DC | ||
| Voltage proof | 500V AC for 1 minute | ||
| Mechanical Performance | Total rotational angle | 300±3° | |
| Rotational torque | 3 to 25mN·m | ||
| Stopper strength | 0.9N·m | ||
| Push-pull strength | 100N max. | ||
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively | ||
| Solder heat resistance | Manual soldering | 350℃ max. 3s max. | |
| Durability | Operating life | 15,000 cycles | |
| Environmental test | Cold | -20±2℃ for 96h | |
| Dry heat | 70±2℃ for 96h | ||
| Damp heat | 40±2℃, 90 to 95%RH for 96h | ||
Photo
Dimensions
Mounting Hole Dimensions
|
Attached Parts
| Hexagonal nut (Unit: mm) |
|
| Flat washer (Unit: mm) |
|
| Bearing screw diameter | M7 |
|
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |