ALPS Manufacturer of Electronic Components/Parts Catalog

16mm Size Metal Shaft Potentiometer RK163 Series

Detail

Model No. RK1631110U0Q

Number of resistor elements Single-unit
Mounting direction Horizontal type
Shaft types Knurled
Terminal style Lead
Length of the shaft 15mm
Center detent Without
Total resistance 10kΩ
Resistance taper 1B
Minimum packing unit (pcs.) 100

Operating temperature range -10℃ to +70℃
Electrical Performance Total resistance tolerance ±20%
Rated power 0.05W
Maximum operating voltage 150V AC, 5V DC
Residual resistance 20Ω max.
Insulation resistance 100MΩ min. 500V DC
Voltage proof 500V AC for 1 minute
Mechanical Performance Total rotational angle 300±3°
Rotational torque 3 to 25mN·m
Stopper strength 0.9N·m
Push-pull strength 100N max.
Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively
Solder heat resistance Manual soldering 350℃ max. 3s max.
Durability Operating life 15,000 cycles
Environmental test Cold -20±2℃ for 96h
Dry heat 70±2℃ for 96h
Damp heat 40±2℃, 90 to 95%RH for 96h

Photo

Metal Shaft Potentiometers

Dimensions

Metal Shaft Potentiometers


Attached Parts

Hexagonal nut (Unit: mm)
Flat washer (Unit: mm)
Bearing screw diameter M7
 
These parts are attached to the following products.
Notes are common to this series/models.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • Additional product specifications in response to those not included in the above recommended products are also available.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.