ALPS Manufacturer of Electronic Components/Parts Catalog
close
> Potentiometers > Metal Shaft Potentiometers
> RK097/RK098 Series > RK09711110EL
Related information
｜Photo ｜Dimensions ｜Mounting Hole Dimensions ｜Dimensions of Terminal ｜Dimensions of Bushings ｜
｜Attached Parts ｜

9mm Size Metal Shaft Multi-ganged Potentiometer RK097/RK098 Series

Detail

Single-shaft with rotary switch type

Model No. RK09711110EL

Number of resistor elements Single-unit
Mounting direction Horizontal type
Shaft types Flat
Length of the shaft 20mm
Center detent Without
Total resistance 10kΩ
Resistance taper 1B
Minimum packing unit (pcs.) 100

Operating temperature range -20℃ to +70℃
Electrical Performance Total resistance tolerance ±20%
Rated power 0.05W
Maximum operating voltage 50V AC, 10V DC
Residual resistance 20Ω max.
Insulation resistance 100MΩ min. 250V DC
Voltage proof 300V AC for 1 minute
Mechanical Performance Total rotational angle 300±5°
Rotational torque 2 to 25mN·m
Stopper strength 0.5N·m
Push-pull strength 100N max.
Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively
Solder heat resistance Manual soldering 350℃ max. 3s max.
Dip soldering 260±5℃, 5±1s
Durability Operating life 15,000 cycles
Environmental test Cold -30±2℃ for 96h
Dry heat 70±2℃ for 96h
Damp heat 40±2℃, 90 to 95%RH for 96h

Photo

Metal Shaft Potentiometers

Dimensions

Metal Shaft Potentiometers

Mounting Hole Dimensions

Metal Shaft Potentiometers

 
Viewed from mounting side.

Dimensions of Terminal

Metal Shaft Potentiometers

Dimensions of Bushings

Metal Shaft Potentiometers


Attached Parts

Hexagonal nut (Unit: mm)
Flat washer (Unit: mm)
Bearing screw diameter M9
 
These parts are attached to the following products.

Notes are common to this series/models.
  • For the switch attached, inner axis of the single-shaft or the dual-shaft type can be chosen.
  • Place your purchase order in N minimum package units (N: integer).
  • Ask us for the export packaging unit.
  • Additional product specifications in response to those not included in the above recommended products are also available.
  • We can support a large working temperature range for in-vehicle applications upon request. Contact us if you have any requirements of this kind.
  • This products can be used in vehicles.
    Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.