|
ALPS Manufacturer of Electronic Components/Parts Catalog |
|
 |
||
|
 Related information
|
| ｜Photo ｜Dimensions ｜Mounting Hole Dimensions ｜Tarminal Layout ｜Circuit Diagram ｜ |
|
Knob Operating Type Potentiometer With Knob Type RK10J/RK14J Series
Detail
| Model No. | RK14J12A0A07 |
| Type | 14mm Size |
| Number of resistor elements | Dual-unit |
| Knob types |
Outer size: φ15 Knob t: 0.9mm Color: Black |
| Total resistance | 50kΩ |
| Resistance taper | 15A |
| Soldering | Manual, Dip |
| Mounting board types | Insertion (t: 2mm) |
| For DC use | Not applicable |
| Minimum packing unit (pcs.) | 100 |
| Operating temperature range | -25℃ to +70℃ | ||
| Electrical performance | Total resistance tolerance | ±30% | |
| Rated power | 0.03W | ||
| Maximum operating voltage | 50V AC | ||
| Maximum attenuation | 80dB min. | ||
| Insulation resistance | 100MΩ min. 100V DC | ||
| Voltage proof | 100V AC for 1 minute | ||
| Mechanical performance | Total rotational angle | 270±5° | |
| Strength of the operating section | Rotational torque | 1 to 10mN·m | |
| Stopper strength | 70mN·m | ||
| Push-pull strength (In the direction perpendicular to the P. W. Board surface) | 5N max. | ||
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively | ||
| Solder heat resistance | Manual soldering | 350℃ max. 3s max. | |
| Endurance | Operating life | 10,000 cycles | |
| Environmental test | Cold | -25±2℃ for 240h | |
| Long-term heat resistance | 70±2℃ for 240h | ||
| Moisture resistance | 40±2℃, 90 to 95%RH for 96h | ||
Photo
Dimensions
Mounting Hole Dimensions
|
Tarminal Layout
Circuit Diagram
|
Notes are common to this series/models. |
|
|
Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 |
| COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. |